piwik image

Dixon® 63PT-0662 DXN 63PT-0662 | Tipco Technologies
Dixon® 63PT-0662
Send Print
  1. pin-int

Dixon® 63PT-0662

Dixon® 63PT-0662 Brass Insert, 3/8 in Compression

  • Manufacturers: Dixon
  • Brand Name: Dixon®
  • Tipco Part No: DXN 63PT-0662
  • MPN: 63PT-0662
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Register to see Availability

Dixon® Insert, Connection Type 1: Compression, Connection Size 1: 3/8 in, Connection Type 2: Compression, Connection Size 2: 3/8 in, 200 psi, Brass, Dimensions: 0.25 in OD x 0.56 in L, Dimension Standards: SAE J512, -65 to 250 deg F, For Use With: Copper, Aluminum and Thermoplastic Tubing, Low and Medium Pressure Tubing Connection

California residents see Prop 65 WARNINGS

Fitting Type      :      Insert
Connection 1      :      3/8 in Compression
Connection Type 1      :      Compression
Connection Size 1      :      3/8 in
Connection 2      :      3/8 in Compression
Connection Type 2      :      Compression
Connection Size 2      :      3/8 in
Pressure Rating      :      200 psi
Material      :      Brass
Dimensions      :      0.25 in OD x 0.56 in L
Dimension Standards      :      SAE J512
Temperature Rating      :      -65 to 250 deg F
For Use With      :      Copper, Aluminum and Thermoplastic Tubing, Low and Medium Pressure Tubing Connection

Applications: For low and medium-pressure tubing connection work where excessive vibration or tube movement is not involved

Instructions:

  • No flaring, soldering or other preparation of tubing necessary to assemble.
  • Slide nut, then sleeve onto tubing.
  • The thread end of the nut must face out.
  • Insert tube into the fitting.
  • Be sure the tube is bottomed on the fitting shoulder.
  • Assemble nut to body, and tighten hand tight.
  • Then follow the number of appropriate wrench turns for the given size.

Safety Notes:

  • Not recommended for steel tubing.
  • Not recommended for applications using gaseous media.