410-356-0003
.png)
Gates® Braided Hydraulic Hose, Series: M2T® Series, Hose Type: Braided Hose, 1/4 in Nominal, 04 Dash Size, 1/4 in Inside Dia, 0.56 in Outside Dia, 550 ft Length, Rubber Tube, Nitrile Cover, Two Braided High Tensile Steel Wire Reinforcement, Black Hose Color, 1-1/2 in Bend Radius, 6000 psi, Abrasion, Oil, Weather Resistance Properties, 212 deg F Temperature High, -40 deg F Temperature Low
| Cover Material | : | Nitrile |
| Bend Radius | : | 1-1/2 in |
| Length | : | 550 ft |
| Series | : | M2T® Series |
| Resistance Properties | : | Abrasion, Oil, Weather |
| Nominal Size | : | 1/4 in |
| Dash Size | : | 04 |
| Inside Diameter | : | 1/4 in |
| Outside Diameter | : | 0.56 in |
| Temperature Low | : | -40 deg F |
| Temperature High | : | 212 deg F |
| Pressure Rating | : | 6000 psi |
| Reinforcement | : | Two Braided High Tensile Steel Wire |
| Tube Material | : | Rubber |
- Easy to route and to install in tight areas
- M2T® hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids
- Superior flex impulse performance tested to 600,000 impulse cycles at 50% of EN 857 2SC bend radii
- Meets flame-resistant acceptance designation MSHA 2G
- M2T® hose has smaller exterior dimensions and significantly tighter bend radius than competitive R16 hoses
- Tighter bend radius reducing hose assembly length to save money
- Validated with MegaCrimp®
- Black, oil, abrasion and weather-resistant, synthetic rubber (modified nitrile - Type C2) with color-coded lay line cover
Specification Sheet