410-356-0003
.png)
Dixon® Sand Blast Hose End, Connection Type 1: Hose, Connection Size 1: 3/4 in, 110 psi, Aluminum, 70 deg F
California residents see Prop 65 WARNINGS
| Connection Size 1 | : | 3/4 in |
| Pressure Rating | : | 110 psi |
| Material | : | Aluminum |
| Fitting Type | : | Hose End |
| Temperature Rating | : | 70 deg F |
| Connection 1 | : | 3/4 in Hose |
| Connection Type 1 | : | Hose |
- Supplied with screws
Applications: For use on sand blast hose
Instructions:
- Ends of hose must be cut square to fit snug against metal end.
- Holding hose tight to end of fitting, insert screws and turn in full, putting screw 180 deg from first to ensure best centering.
- After all screws have been placed, check tube opposite screws to be sure screws have not penetrated completely through.
Safety Notes:
- Abrasive blasting equipment must have hose safety cables or hose coupling safety clips installed.
Catalog/Catalog Cut Sheet
