410-356-0003
.png)
Dixon® Hose Mender, Connection Type 1: Hose Barb, Connection Size 1: 1/4 in, Connection Type 2: Hose Barb, Connection Size 2: 1/4 in, Steel, Finish: Zinc-Plated
California residents see Prop 65 WARNINGS
| Fitting Type | : | Hose Mender |
| Connection Size 2 | : | 1/4 in |
| Material | : | Steel |
| Finish | : | Zinc-Plated |
| Connection 1 | : | 1/4 in Hose Barb |
| Connection Type 1 | : | Hose Barb |
| Connection Size 1 | : | 1/4 in |
| Connection 2 | : | 1/4 in Hose Barb |
| Connection Type 2 | : | Hose Barb |
Safety Notes:
- Menders are not for compressible products such as air, nitrogen or steam.
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
- Consult Dixon® for recommendations.
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for 15 min without leaking or coupling movement.
- For additional information and detailed instructions on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
Catalog/Catalog Cut Sheet
